Product image 1
Product image 2
Product image 3
HomeStore

500 MPa Max. Manual Cold Isostatic Press (CIP) with 30 mm ID Vessel - YLJ-CIP-500M

500 MPa Max. Manual Cold Isostatic Press (CIP) with 30 mm ID Vessel - YLJ-CIP-500M

YLJ-CIP-500M is a manual cold isostatic pressing (CIP) device operated via a manual hydraulic pump up to 500 Mpa. Two sets of the CIP vessel and press are available to choose from: 30 mm vessel with 40T press and 50 mm vessel with 40T. It is an excellent tool for material research to prepare high-density compounds and ceramics, compared to dry die pressing.

Specifications:
Hydraulic Cylinder Pressure
  • 0 - 40T for 30 mm ID vessel (38T for continuous use)
Bottom Cylinder (Piston) Traveling Distance
  • 30 mm Maximum
CIP Vessel Size
  • Selectable chamber size at
  • Inside: 30 mm (I.D.) x 110 mm (H) Overall: Φ100 × 315 H (mm)
Vessel Pressure
  • 0 - 500 MPa
  • For calculating the actual pressure (MPa) applied to your working piece, please follow the equations below:
  • P = T x g x 10 / (π x r^2 )
    • P: Actual pressure (Mpa) on the working piece
    • T: Actual force (metric ton) applied on the pressure vessel cylinder
    • g: gravitational acceleration of earth g ≈ 9.8 m/s2
    • π: ~3.14
    • r: Radius (cm) of the Pressure Vessel (1.5 or 2.5 cm)
Hydraulic Press
  • Manual operation hydraulic press with pressure gauge and valve
  • Max. pressure 65 MPa
  • Optional: You may upgrade the manual pump to an automatic electric pump at the extra cost ( Click Pic below to see specs )
Compliance
  • CE Certified
  • No NRTL certification is required due to no electricity 
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic below to order ). Check this link to understand liquid rubber for sample preparation. ( Pic. 1)
  • Also, you may use a chamber vacuum sealer to seal the sample before CIP ( Pic. 2)
  • In order to get a high density of the sample, you shall press pre-pressing a pellet, then CIP ( Pic. 3)
  •  Pic. 1  Pic. 2 Pic. 3
Warning
  • The Max. pressure the mold can handle is 85T, please do NOT exceed it
  • Never let the press holding the target pressure for more than 1 hour
  • It's normal that the target pressure decreases a little bit during the pressure holding time
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance (30mm)

 

$3,709.30

Original: $10,598.00

-65%
500 MPa Max. Manual Cold Isostatic Press (CIP) with 30 mm ID Vessel - YLJ-CIP-500M—

$10,598.00

$3,709.30

Product Information

Shipping & Returns

Description

YLJ-CIP-500M is a manual cold isostatic pressing (CIP) device operated via a manual hydraulic pump up to 500 Mpa. Two sets of the CIP vessel and press are available to choose from: 30 mm vessel with 40T press and 50 mm vessel with 40T. It is an excellent tool for material research to prepare high-density compounds and ceramics, compared to dry die pressing.

Specifications:
Hydraulic Cylinder Pressure
  • 0 - 40T for 30 mm ID vessel (38T for continuous use)
Bottom Cylinder (Piston) Traveling Distance
  • 30 mm Maximum
CIP Vessel Size
  • Selectable chamber size at
  • Inside: 30 mm (I.D.) x 110 mm (H) Overall: Φ100 × 315 H (mm)
Vessel Pressure
  • 0 - 500 MPa
  • For calculating the actual pressure (MPa) applied to your working piece, please follow the equations below:
  • P = T x g x 10 / (π x r^2 )
    • P: Actual pressure (Mpa) on the working piece
    • T: Actual force (metric ton) applied on the pressure vessel cylinder
    • g: gravitational acceleration of earth g ≈ 9.8 m/s2
    • π: ~3.14
    • r: Radius (cm) of the Pressure Vessel (1.5 or 2.5 cm)
Hydraulic Press
  • Manual operation hydraulic press with pressure gauge and valve
  • Max. pressure 65 MPa
  • Optional: You may upgrade the manual pump to an automatic electric pump at the extra cost ( Click Pic below to see specs )
Compliance
  • CE Certified
  • No NRTL certification is required due to no electricity 
Application Notes
  • You may use the liquid rubber to seal the sample to be CIP ( click Pic below to order ). Check this link to understand liquid rubber for sample preparation. ( Pic. 1)
  • Also, you may use a chamber vacuum sealer to seal the sample before CIP ( Pic. 2)
  • In order to get a high density of the sample, you shall press pre-pressing a pellet, then CIP ( Pic. 3)
  •  Pic. 1  Pic. 2 Pic. 3
Warning
  • The Max. pressure the mold can handle is 85T, please do NOT exceed it
  • Never let the press holding the target pressure for more than 1 hour
  • It's normal that the target pressure decreases a little bit during the pressure holding time
  • Pressure must be completely released first, then make sure the handwheel and the pressure release valve has been tightened before pressing
  • Do not raise the bottom cylinder (piston) more than it's maximum traveling distance (30mm)

 

You may also like

NEW
Thumbnail 1Thumbnail 2

330 MPa CIP (Cold Isostatic Pressing) Press with 30mm ID Vessel up - YLJ-CIP-20B

$9,998.00

NEW
Thumbnail 1Thumbnail 2

CIP Die Set (80 mm ID, Max. 300 MPa Vessel) for Cold Isostatic Press, - CIP80-DIE

$12,986.00

-65%NEW
Thumbnail 1Thumbnail 2

Complete CIP Die Set (110 mm ID, Max. 350 MPa Vessel) for Cold Isostatic Press - CIP110D350

$18,998.00

$6,649.30

-65%NEW
Thumbnail 1Thumbnail 2

Complete CIP Die Set (150 mm ID, Max. 120 MPa Vessel) for Cold Isostatic Press - CIP150-die

$18,995.00

$6,648.25

NEW
Thumbnail 1Thumbnail 2

200T Electric Cold Isostatic Pressing (CIP) with ID 60/80 mm Vessel - YLJ-CIP-200

$20,798.00

-65%NEW
Thumbnail 1Thumbnail 2

500 MPa CIP Die Set ( 30 or 50 mm ID.) for Cold Isostatic Press - CIP500-DIE

$4,995.00

$1,748.25

-65%NEW
Thumbnail 1Thumbnail 2

900 Mpa CIP Die Set ( 35 mm ID. Vessel) for Cold Isostatic Press - CIP35D900

$6,998.00

$2,449.30

-65%NEW
Thumbnail 1Thumbnail 2

Complete CIP Die Set (22 mm ID Max.400 MPa Vessel) - CIP20D

$1,998.00

$699.30

-65%NEW
Thumbnail 1Thumbnail 2

Complete CIP Die Set ( 30 mm ID. 330 Mpa Vessel) for Cold Isostatic Press, - CIP20-DIE

$2,595.00

$908.25

-65%NEW
Thumbnail 1Thumbnail 2

250 MPa Vessel CIP Die Set (60 mm ID) for Cold Isostatic Press - CIP60-DIE

$8,698.00

$3,044.30

-65%NEW
Thumbnail 1Thumbnail 2

Compact CIP with 22mm ID Vessel Max. 380 Mpa for use in Glovebox - YLJ-CIP-15

$4,698.00

$1,644.30