High-Pressure SS310S Alloy Tube with Flanges, 60/80/100mm O.Dx1000mm L, 900C Max. - Tube-HP-SS310

This is an SS310S tube vessel that can be used under oxidation, inert, or reduction gas atmosphere up to 900°C for special compounds processing. Such a tube is also suitable for use with MTI tube furnaces to create a system that satisfies ultra-high vacuum or high-pressure HIP (hot isostatic pressure) applications. It is an ideal vessel for researching the new generation materials at low cost.

Specification:

Model Number	Tube-HP-SS-60-52-1000	Tube-HP-SS-80-70-1000	Tube-HP-SS-100-90-1000
Outside Diameter:	60 mm	80 mm	100 mm
Inside Diameter:	52 mm	70 mm	90 mm
Tube Length:	1000 mm
Flanges	CF type flange with Copper O-ring in two ends High pressure needle valves are included 1/4NPS refale connector in two ends
Working Temp.	800°C continuous (without load) 900°C max.for < 1hr
Working Pressure           & Temperature:	Max.pressure Max temp 30 PSI (  0.2 MPa) 900°C 391 PSI  (2.7 Mpa)   800°C 464 PSI  (3.2 Mpa)   700°C 551 PSI  (3.8 Mpa)   600°C 623 PSI  (4.3 Mpa)   500°C	Max.pressure Max temp 20 PSI (  0.15MPa ) 900°C 362 PSI  (2.5 Mpa) 800°C 420 PSI  (2.9 Mpa)  700°C 507 PSI  (3.5 Mpa)  600°C 565 PSI  (3.9 Mpa)  500°C	Max.pressure Max temp 275 PSI  (1.9 Mpa)  800°C 333 PSI  (2.3 Mpa) 700°C 391 PI  (2.7 Mpa) 600°C 449 PI  (3.1 Mpa) 500°C
Installation	Thoroughly clean the copper gasket before use Use a torque-adjustable wrench to tighten the flange properly   Warning:  Regularly run a visual inspection on the tube surface. The high-pressure vessel is the consumable part; please replace the tube once deformation is noticed. Must install a pressure regulator on the gas cylinder side to regulate pressure. Service-life design for 2,000 hours at 800 °C.
Attention:	To get a longer tube service life, please use a quartz or alumina crucible to carry the sample. Instead of loading the sample directly inside the tube, please click the picture below to choose a crucible boat
Optional Accessories	A torque wrench is available here to avoid overtightening the flange bolts High-pressure relief valve with pre-set safe pressure High-temperature pressure transmitter to read pressure