Product image 1
HomeStore

1800°C Grade MoSi2 Heating Element (30x500mm) - HEL1800T-30500

1800°C Grade MoSi2 Heating Element (30x500mm) - HEL1800T-30500


Specifications
  • Materials: MoSi2
  • Working temperature:
    • 1750°C (in air) (shrot time)
    • 1650°C (in N2)
    • 1220°C ~ 1500°C (in H2)
  • Volume Density: 5 ~ 5.6g/cm3
  • Bend strength: 15 ~ 25kg/cm3
  • Vickers hardness: (HV) 570kg/mm2)
  • Porosity rate: 7.4%
  • Water absorption: 2%
  • Heat extensibility: 4%
  • Capable for KSL-1700X-A4 furnace
Resistivity Properties of MoSi2 Heating Element
  1. The resistivity of MoSi2 heating elements rises with the increase in temperature (shown in the graph below). When the temperature of the heating stage is below 300°C, less than 35% of the total output power should be applied to avoid stressing the elements with excessive current.
  2. Generally, the resistance of heating elements will not be affected by aging under normal operating conditions, therefore old elements can be used together with new ones.
Installation When installing a heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.
Warning
Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them. 
No warranty will be issued for damage caused by improper installation.
Inspect your delivery:
Please check the package for damages before accepting delivery.
Should damages be found, please keep all packaging materials, take pictures, and report immediately to the carrier/MTI.
No Warranty:
Kindly note this item is a consumable part, and not covered by a warranty. Make sure to inspect for defect(s) thoroughly before use. 
$111.65

Original: $319.00

-65%
1800°C Grade MoSi2 Heating Element (30x500mm) - HEL1800T-30500—

$319.00

$111.65

Product Information

Shipping & Returns

Description


Specifications
  • Materials: MoSi2
  • Working temperature:
    • 1750°C (in air) (shrot time)
    • 1650°C (in N2)
    • 1220°C ~ 1500°C (in H2)
  • Volume Density: 5 ~ 5.6g/cm3
  • Bend strength: 15 ~ 25kg/cm3
  • Vickers hardness: (HV) 570kg/mm2)
  • Porosity rate: 7.4%
  • Water absorption: 2%
  • Heat extensibility: 4%
  • Capable for KSL-1700X-A4 furnace
Resistivity Properties of MoSi2 Heating Element
  1. The resistivity of MoSi2 heating elements rises with the increase in temperature (shown in the graph below). When the temperature of the heating stage is below 300°C, less than 35% of the total output power should be applied to avoid stressing the elements with excessive current.
  2. Generally, the resistance of heating elements will not be affected by aging under normal operating conditions, therefore old elements can be used together with new ones.
Installation When installing a heating element into furnaces, a separator should be placed between the two shanks of the heating element before hanging the element inside the furnace chamber.  The proper separator width should be selected to fit the shanks smoothly and avoid damage to the element.
Warning
Exercise extreme caution to not apply any stress on the elements during installation. Heating elements are very brittle and could break if the separator is too wide or if too much pressure is applied on them. 
No warranty will be issued for damage caused by improper installation.
Inspect your delivery:
Please check the package for damages before accepting delivery.
Should damages be found, please keep all packaging materials, take pictures, and report immediately to the carrier/MTI.
No Warranty:
Kindly note this item is a consumable part, and not covered by a warranty. Make sure to inspect for defect(s) thoroughly before use. 

You may also like

-65%NEW
Thumbnail 1

PPM Grade Dual Column Inert Gas Purifier with Regeneration Heater (Removing O2 & H2O to PPM) - GPH-DHDO

$2,998.00

$1,049.30

-65%NEW
Thumbnail 1

Inert Gas Regulator, Two Stage Brass 0-100 psi Analytical Cylinder Regulator - CGA-580-LD

$1,090.00

$381.50

-65%NEW
Thumbnail 1

COOPER BUSSMANN - DCM-4 - FUSE, 4A, 600V, FAST ACTING - FA-F-4A-UL-LD

$39.00

$13.65

-65%NEW
Thumbnail 1Thumbnail 2

TC Contactor, AC3 32A/15KW - TC1D3210-LD

$96.00

$33.60

-65%NEW
Thumbnail 1Thumbnail 2

Seamless Stainless Steel Tube: 1/4" OD x79"L (2000mm) for Gas Delivery (2 pcs/package) - SS14Tube

$130.00

$45.50

NEW
Thumbnail 1

TE CONNECTIVITY CIRCUIT BREAKER, HYD-MAG, 2P, 277V, 40A -FA-F-40A-UL-LD

$61.95

-65%NEW
Thumbnail 1

Fuse Holder for cylinder type fuse - FA-FH-4A-UL-LD

$19.00

$6.65

-65%NEW
Thumbnail 1

Fiberglass Tape Coated with Teflon PTFE - 10 Mil, 1" x 18 yds - MTI-TAPE-S11728-LD

$109.00

$38.15

-65%NEW
Thumbnail 1Thumbnail 2

Brushless DC Pump for EQ-KJ5000 -KJ50-Pump

$295.00

$103.25

-65%NEW
Thumbnail 1

HN Female Connector .906 inch Hole Spacing for VTC-1RF and VTC-2RF, MTI-PE4183

$49.99

$17.50

-65%NEW
Thumbnail 1

High Pressure Solenoid Valve max 15 MPa, MTI-GSR-A52401004

$480.00

$168.00

-65%NEW
Thumbnail 1

Teflon gas delivery tube, per ft, FA-PTFE-14D

$2.55

$0.89

1800°C Grade MoSi2 Heating Element (30x500mm) - HEL1800T-30500 | MTI Online Store